English English
Home > Products > Elbow Connector > 630A Elbow Connector

630A Elbow Connector
The 630A Elbow Connector series include 630A front/rear elbow connectors, arresters, through connectors, integrated casing, casing holder and special-shaped bus-bar.  The front/rear elbow connectors is the main product of this series, which directly connected with the inlet and outlet bushings of the switch cabinet and the wall bushings of the cable branch box to provide fully insulated safe lines for the switch cabinet and cable branch box. The tail can be directly blocked with insulation plug, or can be extended to connect the rear connector or rear arrester.

Fully shielded and fully sealed separable connections are provided when the 630A Elbow Connector is fitted with an appropriate casing or plug; It can run for a long time under water and other harsh conditions; The built-in capacitance test point is used to measure the line live state, and must be used with live display; There is no minimum interphase installation distance requirement; Installation can be vertical, horizontal, or any Angle.

HUAYI CABLE ACCESSORIES Co.,Ltd. 630A Elbow Connector are compact structure, small footprint, easy installation, easy operation, maintenance free. Outdoor use all-weather, fully protective structure, used in high temperature, cold, flood immersion, high dust area. It's also can be used as a switch, with load plug, open 200A load current.
View as  
 

  • The Bus Connector is used for the top expansion connection of SF6 insulated metal switchgear, realizing full sealing and full insulation connection between the load switch and bus,completely avoiding the fatal defect brought by high voltage exposure in bad weather,and it is easy to install and high reliability.The length of the bus can be customized according to customer requirements,and the end of the bus is fixed with terminals and bushing. Suitable for electrical system with rated current up to 1250A.

    Read More Send Inquiry

  • The Bushing Holder for 12kV and 24kV Inflatable Cabinets provides an interface for the 630A cable connector, which is mainly used for outdoor ring network switchgear and other equipment. It is installed on the inflatable cabinet, and is connected with the 630A type cable connector, which is the 630A inlet and outlet line, and is connected with the shielded bolt type cable connector. Our independent plant covers an area of more than 14,000 square meters of production and testing equipment are complete.

    Read More Send Inquiry

  • The Butt Bushing mainly used for cable branch box, ring network switch cabinet, connected with front plug, can be connected with live indicator, display bus live state. The body of the product is made of high quality epoxy resin and has good mechanical and electrical properties. Our independent plant covers an area of more than 14,000 square meters of production and testing equipment are complete.

    Read More Send Inquiry

  • The 12kV integrated bushing provides interface for 630A European-style joint products, which is mainly used for SF6 load switch branch box to connect with European-style front and rear joint and other products. The body of the product is made of high quality epoxy resin. Our independent plant covers an area of more than 14,000 square meters of production and testing equipment are complete.

    Read More Send Inquiry

  • The Front or Rear Surge Arrester can be directly connected to the casing seat, through the wall casing, etc.,to provide reliable over voltage protection for the power system. It can provide reliable over voltage protection for the power system. The shielded rear arrester's outer semi-conductive layer ensures the safety of installation and maintenance personnel and the safe operation of the equipment, at the same time, it's UV resistance, resistance to wire aging, waterproof, moisture-proof performance to ensure that the product can operate safely and reliably in harsh environment.

    Read More Send Inquiry

  • As one of the leading industries in the power cable accessories, Our 12kV Special-shaped Bus-bar is widely used in cable branch box with SF6 load switch or vacuum circuit breaker. The structure of the 12kV Special-shaped Bus-bar is flexible and changeable to meet a variety of wiring modes; Full insulation, full sealing, high safety performance Our independent plant covers an area of more than 14,000 square meters of production and testing equipment are complete.

    Read More Send Inquiry
 12 
Huayi is a professional high quality 630A Elbow Connector Manufacturers and Suppliers in China. If you want to buy cheap 630A Elbow Connector in stock, contact us to get low price. And we also support bulk. If you need, we also provide quotation. We sincerely welcome new and old customers to visit our factory for consultation and negotiation. For more information, contact us now.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept