630A Elbow Connector

The 630A Elbow Connector series include 630A front/rear elbow connectors, arresters, through connectors, integrated casing, casing holder and special-shaped bus-bar.  The front/rear elbow connectors is the main product of this series, which directly connected with the inlet and outlet bushings of the switch cabinet and the wall bushings of the cable branch box to provide fully insulated safe lines for the switch cabinet and cable branch box. The tail can be directly blocked with insulation plug, or can be extended to connect the rear connector or rear arrester.

Fully shielded and fully sealed separable connections are provided when the 630A Elbow Connector is fitted with an appropriate casing or plug; It can run for a long time under water and other harsh conditions; The built-in capacitance test point is used to measure the line live state, and must be used with live display; There is no minimum interphase installation distance requirement; Installation can be vertical, horizontal, or any Angle.

HUAYI CABLE ACCESSORIES Co.,Ltd. 630A Elbow Connector are compact structure, small footprint, easy installation, easy operation, maintenance free. Outdoor use all-weather, fully protective structure, used in high temperature, cold, flood immersion, high dust area. It's also can be used as a switch, with load plug, open 200A load current.
View as  
 
  • 12kV π Type Touchable Front or Rear Connector is applied to ring network cabinet, cable branch box of the main network system or box transformer ring network system, as the incoming and outgoing cable connection. It can be connected to 630A busbar wire, and can also be connected to multiple groups by connect touch-able rear connector to form multiple loops. The 12kV π Type Touchable Front or Rear Connector rated current 630A, suitable for XLPE power cable with 25-500mm2 cross section.

  • The installation of 15kV Connector Special Cold Shrinkable Cable Accessories is cold shrinkage construction, in the process of construction as long as the plastic wire core of the cable can automatically complete the contraction, without heating, this process is simple and practical, relative to the installation of heat shrinkage cable to eliminate the phenomenon of uneven shrinkage of insulation tube. When the heat shrinkable cable accessories are installed, the cable needs to be heated, which is easy to lead to uneven heating or no contraction at all, thus affecting the construction quality.

  • Front or Rear Connector is directly connected with the inlet and outlet bushings of the switch cabinet and the wall bushings of the cable branch box to provide fully insulated safe lines for the switch cabinet and cable branch box. The tail can be directly blocked with insulation plug, or can be extended to connect the rear connector or rear arrester.

Huayi is a professional high quality 630A Elbow Connector Manufacturers and Suppliers in China. If you want to buy cheap 630A Elbow Connector in stock, contact us to get low price. And we also support bulk. If you need, we also provide quotation. We sincerely welcome new and old customers to visit our factory for consultation and negotiation. For more information, contact us now.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept