English English
Home > Products > Cold Shrinkable > Cold Shrinkable Straight Through Joint

Cold Shrinkable Straight Through Joint
Cold Shrinkable Straight Through Joint are made of an elastomer material that is first injected and vulcanized in the factory, and then expanded. After expansion, plastic spiral support strips are used as internal support. The advantages of cold shrinkage cable accessories are mainly reflected in the site installation, the site installation only need to remove the plastic spiral support strip will automatically shrink, and in the contraction process will not be caused by human factors, the phenomenon of uneven contraction of the insulation tube. It is also used in a wide range of places, in some places where the use of open fire and other heat sources can be used, such as petrochemical industry can be used.

Both silicone rubber and ETHYLENE propylene rubber Cold Shrinkable Straight Through Joint have excellent weather resistance, acid and alkali resistance, and achieve the effect of breathable sealing, which is the ideal sealing product for communication cable, coaxial cable, medium and low voltage power cable. 

The excellent place of Cold Shrinkable Straight Through Joint is that it does not need fire to heat and shorten, and the effect has certain advantages in high altitude. Because of its special principle, it is very suitable for outdoor use.

HUAYI CABLE ACCESSORIES Co.,Ltd. Cold Shrinkable Straight Through Joint also meet the needs of low to high voltage and many voltage levels, suitable for XLPE, rubber insulated single core to multi-core power cables. It passed 1509001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.
View as  
 

  • The installation of 10kV Cold Shrinkable Three Cores Straight Through Joint is cold shrinkage construction, in the process of construction as long as the plastic wire core of the cable can automatically complete the contraction, without heating, this process is simple and practical, relative to the installation of heat shrinkage cable to eliminate the phenomenon of uneven shrinkage of insulation tube. When the heat shrinkable cable accessories are installed, the cable needs to be heated, which is easy to lead to uneven heating or no contraction at all, thus affecting the construction quality.

    Read More Send Inquiry

  • The installation of 10kV Cold Shrinkable Single Core Straight Through Joint is cold shrinkage construction, in the process of construction as long as the plastic wire core of the cable can automatically complete the contraction, without heating, this process is simple and practical, relative to the installation of heat shrinkage cable to eliminate the phenomenon of uneven shrinkage of insulation tube. When the heat shrinkable cable accessories are installed, the cable needs to be heated, which is easy to lead to uneven heating or no contraction at all, thus affecting the construction quality.

    Read More Send Inquiry

  • The installation of 1kV Cold Shrinkable Five Cores Straight Through Joint installation procedures from one end to the other side of the construction, the construction process cannot be changed, the process is very difficult to have a bubble will appear in the cable pipe, therefore the construction quality is higher, the construction of hot shrinkage is different, heat from one end to the other side, it is easy to result in uneven heating, which leads to the generation of air bubbles, seriously affect the construction quality.

    Read More Send Inquiry

  • The installation of 1kV Cold Shrinkable Four Cores Straight Through Joint is cold shrinkage construction, in the process of construction as long as the plastic wire core of the cable can automatically complete the contraction, without heating, this process is simple and practical, relative to the installation of heat shrinkage cable to eliminate the phenomenon of uneven shrinkage of insulation tube. When the heat shrinkable cable accessories are installed, the cable needs to be heated, which is easy to lead to uneven heating or no contraction at all, thus affecting the construction quality.

    Read More Send Inquiry

  • The 1kV Cold Shrinkable Three Cores Straight Through Joint are anti-pollution, anti-aging, good hydrophobicity, excellent cold resistance and heat resistance, especially suitable for high altitude area, cold area, wet area, salt fog area and heavy pollution area. And installation without open fire, especially suitable for petroleum, chemical, mining and other flammable and explosive places.

    Read More Send Inquiry

  • The installation of 1kV Cold Shrinkable Two Cores Straight Through Joint installation procedures from one end to the other side of the construction, the construction process cannot be changed, the process is very difficult to have a bubble will appear in the cable pipe, therefore the construction quality is higher, the construction of hot shrinkage is different, heat from one end to the other side, it is easy to result in uneven heating, which leads to the generation of air bubbles, seriously affect the construction quality.

    Read More Send Inquiry
 12345 
Huayi is a professional high quality Cold Shrinkable Straight Through Joint Manufacturers and Suppliers in China. If you want to buy cheap Cold Shrinkable Straight Through Joint in stock, contact us to get low price. And we also support bulk. If you need, we also provide quotation. We sincerely welcome new and old customers to visit our factory for consultation and negotiation. For more information, contact us now.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept