Products

View as

15kV Elbow Type Cable Connector
15kV Elbow Type Cable Connector is used to provide power for electric operation mechanism ,or fully insulation,fully shield ,fully sealing for the high voltage side of the mutual inductor JDZ12A-10R. It is suitable for 15kV 35~50mm2 XLPE. The 15kV Elbow Type Cable Connector test point can install live display to check the live status of the equipment and meet the requirements of the nuclear phase of the line. It can be operated with live, but cannot cut off short circuit current. It’s suitable for XLPE cable with sectional area 35mm2~150mm2.
Read More Send Inquiry
24kV Extended Bushing Holder
24kV Extended Bushing Holder or 24kV 250A bushing holder provides the interface for the 250A cable connector and mostly used on the oil-insulated (R-temp, hydrocarbon, or silicon) apparatus, including switch gear, transformer and capacitors. The bushing holder is molded using high quality epoxy rubber, which meet the requirement of standard EN50180/EN50181 DIN47636/HN52-S-61.
Read More Send Inquiry
24kV Bushing Holder
The 24kV Bushing Holder provides the interface for the 250A cable connector and mostly used on the oil-insulated (R-temp, hydrocarbon, or silicon) apparatus, including switch gear, transformer and capacitors. The Apparatus Bushing is molded using high quality epoxy rubber, which meet the requirement of standard EN50180/EN50181 DIN47636/HN52-S-61.
Read More Send Inquiry
10kV and 24kV Straight-through Cable Connector
10kV and 24kV Straight-through Cable Connector threads into a universal bushing well to provide the same function as an integral load break bushing. Using bushing inserts makes field installation and replacement possible and efficient. Bushing insert and elbow connectors comprise the essential components of all load break connections. It is mainly used as the high-voltage electrical connection for American box, outdoor ring network cabinet. Bushing insert is used with bushing holder that makes it possible to on-site installation and replacement.
Read More Send Inquiry
10kV and 24kV Elbow Type Cable Connector
10kV and 24kV Elbow Type Cable Connector is used to provide power for electric operation mechanism ,or fully insulation,fully shield ,fully sealing for the high voltage side of the mutual inductor JDZ12A-10R. It is suitable for 15kV 35~50mm2 XLPE. The 10kV and 24kV Elbow Type Cable Connector test point can install live display to check the live status of the equipment and meet the requirements of the nuclear phase of the line. It can be operated with live, but cannot cut off short circuit current. It’s suitable for XLPE cable with sectional area 35mm2~150mm2.
Read More Send Inquiry
15kV Hybrid Bus-bar
600A bus-bar acts as bus-bar in the cable branch line. It can combine T cable joint, T -II cable joint, 600A extension tube and 600A insulation cap as a cable branch lines. 600A/ 200A hybrid bus-bar gathers 200A and 600A bolt type of bus-bar interface. The 15kV Hybrid Bus-bar is made of high quality EPDM. It has the characteristics of the insulation, fully sealed. With T type cable joint, T - type cable joint or elbow cable joint connection, configuration is varied.
Read More Send Inquiry