10kV and 24kV Elbow Type Cable Connector
  • 10kV and 24kV Elbow Type Cable Connector10kV and 24kV Elbow Type Cable Connector

10kV and 24kV Elbow Type Cable Connector

10kV and 24kV Elbow Type Cable Connector is used to provide power for electric operation mechanism ,or fully insulation,fully shield ,fully sealing for the high voltage side of the mutual inductor JDZ12A-10R. It is suitable for 15kV 35~50mm2 XLPE. The 10kV and 24kV Elbow Type Cable Connector test point can install live display to check the live status of the equipment and meet the requirements of the nuclear phase of the line. It can be operated with live, but cannot cut off short circuit current. It’s suitable for XLPE cable with sectional area 35mm2~150mm2.

Send Inquiry

Product Description

10kV and 24kV Elbow Type Cable Connector


1.Product Introduction 


10kV and 24kV Elbow Type Cable Connector is fully-shield and shield and insulated plug-in termination for connecting underground cable to distribution power system of pad-mound transformer, surrounding power supply branch,cable branch box equipped with load bushings. Installed in T-II type cable head the the 200A outlet side, 200A bus-bar and American box single-pass (or double pass) bushing joints and load transfer joint, etc. 10kV and 24kV Elbow Type Cable Connector are fully insulation,fully shield ,fully sealing. The connection is very simple,with a reliable anti-loose device. The rod connector is equipped with arc extinguishing material,so it can be operated in a live state,but cannot cut off short circuit current. It can be used as load switch to switch off 200A current. 


10kV and 24kV Elbow Type Cable Connector


The 10kV and 24kV Elbow Type Cable Connector is used to connect switch cabinet, cable branch box, inlet and outlet bushing and other equipment. HUYI in accordance with the brand of cable accessories and heat shrinkable products through constant research and development of science and technology, has reached the domestic and international most advanced level, at home and abroad enjoys a high reputation, the products sell well all over the country and world. Our 10kV and 24kV Elbow Type Cable Connector full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.


10kV and 24kV Elbow Type Cable Connector factor


Our products, including 10kV and 24kV Elbow Type Cable Connector, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.


10kV and 24kV Elbow Type Cable Connector certificate


2.Product Parameter (Specification) 


Technical Specification

Test Item

Parameters

Wet power frequency voltage withstand

12kV/1min

Dry power frequency voltage withstand

42kV/1min

Power frequency withstand voltage for a long time

35kV/4h

Impulse voltage withstand

95kV±10times

Partial discharge

13kV≤20pc


All the parameters of the 10kV and 24kV Elbow Type Cable Connector are in conformity with the requirements and qualified.

3.Product Feature And Application 


Executive Standard
*DIN47636.7.1990 with Power cable detachable accessory set protruding from cone, dimensions of tube and separable coupling devices Um up to 35kV;
*ANSIIEEE592-1900 Exposed semiconductor sheath for high voltage cable joints and separable insulated connectors;
*IEC60502 Extruded insulated power cables and accessories for rated voltage from 1kV (Um=1.2kV) to 30kV (Um=35kV);
*IEC61442 Test method for accessories of power cables with rated voltage from 6kV (Um=7.2kV) to 30kV (Um=35kV);
*GB12706-2002 Extruded insulated power cables and their accessories for rated voltage 1kV (Um=1.2kV) to 35kV (Um=40.5kV);
*GB311.1-1997 High voltage transmission and distribution equipment insulation coordination;
*GB/41.9-1999 Technical conditions of high pressure casing;
*GB11032-2010 Ac non - gap metal oxidation arrester;

4.Product Details 


The details of the 10kV and 24kV Elbow Type Cable Connector 


10kV and 24kV Elbow Type Cable Connector


5.Product Qualification 


The 10kV and 24kV Elbow Type Cable Connector has compact structure, small footprint, easy installation, convenient operation and maintenance free. The 10kV and 24kV Elbow Type Cable Connector has an outdoor all-weather, fully protective structure. Suitable for high temperature, cold, flood immersion, high dust area. Fully sealed, fully insulated structure, no insulation distance, effectively ensure personal safety. The 10kV and 24kV Elbow Type Cable Connector can be flexibly combined to make the outlet branch number up to seven, and can be combined with the load switch to form a ring network power supply, fully meet a variety of wiring requirements. The 10kV and 24kV Elbow Type Cable Connector can be used as a switch with load plug. After installing fault indicator, cable fault can be detected quickly.


10kV and 24kV Elbow Type Cable Connector equipment


Our products, including 10kV and 24kV Elbow Type Cable Connector, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.

10kV and 24kV Elbow Type Cable Connector test report


6.Deliver, Shipping And Serving 


1. Your inquiry will be replied within 24 hours.
2. We offer you professional service in fluent English.
3. Keep the mass production as the sample in high quality
4. Freight forwarder: faster, safer, and convenient.
5. Quality: we have QC on each process,provide high quality products.
Any problem or needed please feel free let us know, we are glad to service for you
We are factory, we can provide competitive price. And all the products will be shipped after quality inspection. Usually we quote within 24 hours after we get your inquiry. If you can not buy our product in your local area, we will ship a sample to you (Please contact our agent or send email to our mailbox).


10kV and 24kV Elbow Type Cable Connector packing


7.FAQ

Q1: Are you a factory or trading company?
A1: We are a factory, we can provide competitive price.

Q2: How does your factory do regarding quality control?
A2: All the products will be 100% checked before the shipment.

Q3: When can I get the price?
A3: Usually we quote within 24 hours after we get your inquiry.

Q4: How could I get a sample?
A4: If you can not buy our product in your local area, we will ship a sample to you.You will be charged a sample price plus all related shipping costs.Express delivery charge depends on the quantity of the samples.

Q5: Why choose us?
A5: Welcome to our company, we are a group of creative people.
1.High quality is our obligation
2.Customer first, contact us now!
3.Great service is our mission!
4.Quality is the essence, wealth is the fruit.
5.Your opinion is the driving force of our progress.
6.A smile on your face and a service in your heart.

Hot Tags: 10kV and 24kV Elbow Type Cable Connector, China, Cheap, Quality, Bulk, Manufacturers, Suppliers, Factory, Quotation, In Stock

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept